Browse Categories
Browse by Manufacturer
Search
Shopping Cart
Your cart is empty.
Mailing Lists
sign up to get interesting news and updates delivered to your inbox

TA-MAT-56: C7 Vibration Isolation Reinforcement Set, to supplement C4 Vibration Isolation (C4 is not included.), for Matrix-E

<< Previous in Matrix-i/S/E Parts Next in Matrix-i/S/E Parts >>
Price: $35.00
Item Number: TA-MAT-56:6x(4mmRubPost&4mm15mmFFPost&Screw&Nut)
Manufacturer: Turbo Ace
Manufacturer Part No: TA-MAT-56:6x(4mmRubPost&4mm15mmFFPost&Screw&Nut)

This C7 is a suppliment set of 4mm rubber posts with corresponding aluminum posts and hardware used to eninforce the C4 Vibration Isolation Deck. (C4 is not part of this set so you will need to purchase the C4 separately.)

The Turbo Ace Matrix C4 vibration isolation deck is a comprehensive solution in producing high quality video. This dampening system rivals traditional shock plates by using the entire surface of the two top frames as the shock absorbing system. The large frame allows you to place a heavy weight 8,000mAh battery to increased mass for video stability.

See installation instruction video for the C4 Vibration Isolation Deck.
C7 installatin is not shown on this video. For C7 installation, you need to add 6 sets of 4mm screwed rubber posts to C4's existing 3mm screwed rubber posts using the following steps. (1) Loosen and insert 15mm aluminum posts between the lower 2 decks. (2) Install screws on the bottom of the aluminum posts. (3)  Install each rubber post's 4mm screw through the 2nd layer of carbon deck and into the top of the 15mm aluminum posts. (4) Place the C4 isolation deck over all the rubber posts and install the cap nuts to secure the rubber posts

http://www.youtube.com/watch?v=EqWSA0hCn50&feature=youtu.be